Brass Tom Conway////

[SamIam]

My dev 14 has a bad leak in the brass water area quick connects need to order more quick connects

messaged Tom just wondering if these are available anywhere??????

 

[SamIam]

Thats a dang wand not a tom wand and its not the wand with the leak used for illustration purposes only.

 

[Cleanworks]

Try pressure washing outlets. Looks like an open flow QC. Maybe even home Depot.

 

[SamIam]

I looked on his website all I saw was hoses for $100 my hoses are fine quick connects leak

 

[sassyotto]

any Parker Store should have those

 

[Lee Stockwell]

Needs o rings

 

[KevinD]

And some high temp o ring lube

 

[scotty747]

If there open flow 1/4 inch home depot should have em. In a pinch sometimes you can flip em around and put the worn side down and the good side up.

 

[Lyman]

They are on the web site, $42 for two pairs.

 

[SamIam]

They are on the web site, $42 for two pairs.

Thanks I found it needed a new slot glide too.

Is there something in should do to make these brass disconnect last longer? Wd40?

 

[Lee Stockwell]

Parker makes a lube for o rings.

A high temperature lithium grease will work too.

 

[Shane T]

I prefer SS male connects and brass female.

 

[Rob Grady]

Superlube. Either in a spray can or grease in a tube. Part of regular maintenance.

 

[BradFenstermaker]

Northern Tool has open flow QD. Stainless too

 

[Lee Stockwell]

Because the couplers are NOT repeatedly uncoupled there is likely very little metal to metal wear.

It's all o rings.

 

[SamIam]

I ordered new ones from the website I also needed a new slot glide for my 14 inch dev

 

[KevinD]

3 oz. O-Ring Silicone Grease Tube

 

[scotty747]

Wd-40 will swell the O-rings. I use wd-40 ptfe dry lube or any silicon lube.

 

[Wandslinger]

Doesnt Mitch have any?

 

[SamIam]

Doesnt Mitch have any?

I'll check

 

[Wandslinger]

I'll check

That was sarcasm
by the way